ADG PREMIUM UNPRIMED BRASS RIFLE CARTRIDGE CASES

ADG PREMIUM UNPRIMED BRASS RIFLE CARTRIDGE CASESADG .338 lapua 

.338 lapua. Premium brass was designed not only for consistency, but for durability. One of the ways we accomplished this was adding material to the case in specific areas to strengthen it. With the additional material, our brass is heavier than most other manufacturers brass and therefore will require lower charge weights to achieve the same pressures and velocities due to the reduced volume inside the brass. We recommend using a reputable load data source and working up from their recommended minimum starting loads. Failure to reduce charge weights established using other manufacturers brass will likely result in higher pressures and velocities while using ADG Premium brass and may result in unsafe pressure levels. We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type). .338 lapua

 

SPECIFICATIONS ADG PREMIUM UNPRIMED BRASS RIFLE CARTRIDGE CASESADG: .338 lapua 

• Finish: Standard with the anneal line visible
• Quantity: Box (50 pc)

.22 Creedmoor:

• Neck Wall Thickness: .0144″ (average)
• Case Weight: 169.1 grains (average)
• Case Volume: 49.4 grains/H2O (average)

6mm Creedmoor:

• Case Weight: 169.3 grains (average)
• Case Volume: 49.5 grains/H2O (average)
• Neck Wall Thickness: .0145″ (average)

6.5mm Creedmoor:

• Cases have large rifle primer pockets
• Case Weight: 169.5 grains (average)
• Case Volume: 49.6 grains/H2O (average)
• Neck Wall Thickness: .0136″ (average)

6.5mm Remington Short Action Ultra Mag:

• Neck Wall Thickness: .0138″ (average)
• Case Weight: 213.9 grains (average)
• Case Volume: 73.0 grains/H2O (average)

6.5mm PRC:

• Case Weight: 224.1 grains (average)
• Case Volume: 66.9 grains/H2O (average)
• Neck Wall Thickness: .0146″ (average)

.260 Remington:

• Case Weight: 175.2 grains (average)
• Case Volume: 52.6 grains/H2O (average)
• Neck Wall Thickness: .0145″ (average)
• Cases have large rifle primer pockets

.28 Nosler:

• Neck Wall Thickness: .016″ (average)
• Case Weight: 262.5 grains (average)
• Case Volume: 101.5 grains/H2O (average)

7mm Rem Mag:

• Case Weight: n/a
• Case Volume: n/a
• Neck Wall Thickness: n/a

7mm Remmington Short Action Ultra Mag:

• Neck Wall Thickness: .016″ (average)
• Case Weight: 220.1 grains (average)
• Case Volume: 73.1 grains/H2O (average)

.300 Rem Ultra Mag

• Neck Wall Thickness: .0153″ (average)
• Case Weight: 267.0 grains (average)
• Case Volume: 113.1 grains/H2O (average)

.300 PRC:

• Neck Wall Thickness: .0148″ (average)
• Case Weight: 261.9 grains (average)
• Case Volume: 93.5 grains/H2O (average)

.300 Norma Magnum:

• Neck Wall Thickness: .0149″ (average)
• Case Weight: 321.1 grains (average)
• Case Volume: 101.7 grains/H2O (average)

.30 Nosler:

• Case Weight: 256.1 grains (average)
• Case Volume: 99.1 grains/H2O (average)
• Neck Wall Thickness: .0158″ (average)

.308 Winchester:

• Case Weight: 172.3 grains (average)
• Case Volume: 54.0 grains/H2O (average)
• Neck Wall Thickness: .0135″ (average)
• Cases have large rifle primer pockets.

.338 Lapua:

• Case Weight: 312.1 grains (average)
• Case Volume: 115.5 grains/H2O (average)
• Neck Wall Thickness: .0134″ (average)

.338 Remington Ultra Mag:

• Neck Wall Thickness: .0146″ (average)
• Case Weight: 258.5 grains (average)
• Case Volume: 101.5 grains/H2O (average)

.338 Edge:

• Neck Wall Thickness: .0146″ (average)
• Case Weight: 264.7 grains (average)
• Case Volume: 114.6 grains/H2O (average)

.375 Remington Ultra Mag:

• Neck Wall Thickness: n/a
• Case Weight: n/a
• Case Volume: n/a